The F-16TEL is used for carrying 16 phone lines over fiber optic cable. Extend Telephone over Fiber applications offer a secure connection that is impossible to bug. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using a pair of these devices, 16 independent telephone lines can be extended over a fiber link. The F-16TEL provides full service for features like caller ID. The converter can be used in service mode, allowing the connection of 16 telephone sets. The F-16TEL is a simple and reliable solution for data carriers and service providers for Telephone over Fiber links.
• Extend telephone voice transmission up to 20 / 40 / 80km over fiber (model dependent)
• The base model works up to 20Km over single mode fiber or up to 3000 feet over multimode fiber
• Supports telephone voice transmission
• Supports caller ID pass-through
• The Tx Transmitter) connects to FXS (telephone set/fax machine/dial-up modem)
• The RX (receiver) connects to FXO - ( (PBX trunk)
|
16 CH Telephone FXO/FXS Singlemode Fiber Transmitter for up to 20Km (single mode) or up to 3000 feet (multimode fiber) • The Tx Transmitter) connects to FXS (telephone set/fax machine/dial-up modem) • The RX (receiver) connects to FXO - ( (PBX trunk) |
|
16 CH Telephone FXO/FXS Singlemode Fiber Transmitter for up to 40Km (single mode) or up to 3000 feet (multimode fiber) |
|
16 CH Telephone FXO/FXS Singlemode Fiber Transmitter for up to 80Km (single mode) or up to 3000 feet (multimode fiber) |
|
16 CH Telephone FXO/FXS Singlemode Fiber Transmitter for up to 120Km (single mode) or up to 3000 feet (multimode fiber) |
| *All Specifiactions Subject to Change Without Notice | |||
| Optical Interface: | |||
|
ST/PC | ||
|
SM 20/40/80120km MM up to 3000feet | ||
|
MM 1310nm, SM 1310, 1550nm, WDM 1310Tx/1550Rx, 1550Tx/1310Rx | ||
| Electrical Interface | |||
|
RJ-11 | ||
|
600 ohms, Coding : 16 bits liner, Loop Current : 10~100mA Ring Frequency : Acceptable 20 ~50Hz, Insertion Loss: 0.0 ± 1.0dB at 1000H |
||
|
Impedance : 600 ohms, Coding : 16 bits liner, Dial: DTMF and Dial Paul, Battery Source: 48VDC ± 4 |
||
|
Sine Wave | ||
|
20/25/30/50 Hz selectable | ||
|
FXS to FXS : On / 1 sec, Off / 2 sec | ||
|
Reproduces the cadence detected by FXO Insertion Loss 0.0 ± 1.0dB at 1000Hz REN: 4.0B(Ring Equivalence Number |
||
|
Power, FX Link, Phone Act, Test | ||
|
AC 100-240V 50/60Hz) | ||
|
5 W | ||
|
480mm x 225mm x 44mm | ||
|
0~50°C (Operating) 0~70°C (Storage) |
||
|
CE, FCC, LVD, RoHS | ||
|
125,000 h (25°C) | ||
Serial RS-485, RS-422, RS-232 to Fiber Media Converters
Serial Asynchronous Data Fiber Converters. This unit converts RS-232 or RS-422 or RS-485 to fiber optic cable. By transmitting data over optical fiber, these serial media converters provide an economical path to extend the reach of serial devices
USB Fiber Optic Transmission System
4 Port USB Fiber Optic Extender - This kit includes a transmitter and a receiver, can extend USB signals bidirectionally over just one fiber. USB 1.1 &, 2.0 up to 10km over single mode fiber -1.25Gbps (SFP Included)
ES
